8 Methods To Improve Wi-Fi Range And Extend Signal Strength

8 Methods To Improve Wi-Fi Range And Extend Signal Strength

Wi-Fi signals are valuable. As you move away from your router, your Wi-Fi signal will weaken. If you go far enough, you’ll reach a place where Wi-Fi doesn’t work. In this case, you may want to know how to make your Wi-Fi signal stronger.

1. Upgrade your router to 802.11ac or 802.11ax
2. Move your router to improve Wi-Fi signal
3. Switch to a wireless mesh to extend Wi-Fi signal coverage
4. Upgrade your Wi-Fi receiver and antenna
5. Use Wi-Fi extenders (aka repeaters)
6. Make a DIY Wi-Fi antenna booster
7. Update your router’s firmware
8. Change your Wi-Fi channel

Upgrade your router to 802.11ac or 802.11ax standard.

Also Read

What is Appium for Automating Mobile Tests Tools

10 Productivity Alexa Hacks to Organize an Entire Day

10 tips for electric car maintaining your car in freezing conditions

One of the easiest ways to boost your Wi-Fi signal is to get a new router. If you still have an older 802.11g or 802.11n router, your Wi-Fi won’t work as well as it could. Old routers that use the older Wi-Fi standard don’t have the same power or speed as new routers that use the latest 802.11ac Wi-Fi standard. The speed of information transfer over the same distance is probably the biggest difference between the older standard and the newer 802.11ac standard.

For example, 802.11n, introduced in 2009, can send about 600Mbps (about 75MB/s) over a maximum distance of 300 feet outdoors and about 150 feet indoors. 802.11ac, introduced in 2014, can send about 1.13Gbps (about 166.25MB/s) over the same distance.

You can improve your Wi-Fi signal by moving your router around.

If you put your Wi-Fi router under the stairs, it won’t work as well. Or put it behind a piece of steel or a cabinet wrapped in aluminum foil. Where you put your router matters when considering how to extend your Wi-Fi range. Putting your router behind a large, solid object will reduce your Wi-Fi range.

Most of the time, the hallway in the middle of the house is the best place so that the Wi-Fi signal can reach everyone. This doesn’t always work. Move your router to a place where it won’t be blocked by too many things, large objects, or other things. If you need to move your router away from its current location, you may want to consider getting longer cables.

Switching to a wireless mesh network to increase Wi-Fi coverage

A wireless mesh network is a great way to make sure you get the same Wi-Fi signal anywhere in your home. Mesh Wi-Fi typically uses more than one network device to send the same Wi-Fi signal to all parts of your home.

This means that the signal in your downstairs hallway is the same as the signal in your upstairs bathroom, and so on. Mesh networking is different from Wi-Fi signal extenders because it uses only a single, unified wireless network. Mesh networks have been used for a long time in places like shopping malls, festivals and sporting events.

But in the last few years, mesh Wi-Fi has become more common in homes. With a wireless mesh network, it’s easy to add on. Most wireless mesh network devices connect almost immediately to the network you already have, so you don’t have to take the time to set up an extender or booster.

In this way, wireless mesh networks are a great way to extend the range of your Wi-Fi in several different situations. Mesh Wi-Fi kits come in different prices, usually based on coverage, throughput, and the number of bases you need to make your home Wi-Fi heaven.

Replace your Wi-Fi antenna and receiver.

Your Wi-Fi router has an antenna that sends Wi-Fi signals to all corners of your home. By upgrading to an 802.11ac router as described above, you should consider upgrading your antenna. There are several obvious benefits to erecting a better antenna.

• Increased broadcast range. One of the most attractive aspects of a high gain router is that it allows you to broadcast a greater range of Wi-Fi. Having Wi-Fi in every room of your home from one router sounds great.
• Radio and TV stations. When you swap out your high-gain omni-directional antenna for a directional antenna, you have more control over where your Wi-Fi signal goes.
• Faster Wi-Fi: Not only does the range of the signal get bigger, but you may also get an overall throughput boost, which makes things even better.

Changing the antenna on your router is a quick and easy way to strengthen your Wi-Fi signal.

Use a Wi-Fi Extender

If you have a modern 802.11ac router, you can use a wireless extender, but Wi-Fi signal is still an issue. With a wireless extender, you can get your Wi-Fi to cover more of your home without having to add more cables or deal with the complexities of networking. Most Wi-Fi extenders need to be plugged in and turned on, but it depends on the model.

A powerline Wi-Fi extender is probably the easiest way to do this. A powerline adapter plugs directly into the outlet you already have. You plug in a separate one near your router and connect the two with an Ethernet cable.

Then you put another adapter where your Wi-Fi signal needs to be stronger, and voila! You have Wi-Fi in every room and on every floor. you have Wi-Fi in every room and on every floor. on the other hand, the powerline adapter is only as good as the wiring in your home. If you have an old house, a powerline Wi-Fi extender may not give you the better signal you want.

Make a Wi-Fi antenna booster at home

A DIY Wi-Fi antenna booster is another simple solution that works well. It’s easy and quick to boost your Wi-Fi signal with hardware you already have at home. How far you want your signal to go will determine what kind of antenna you need to make yourself. Many online tutorials explain how some DIY Wi-Fi signal boosters work, how to build one, and how to make it work better.

Upgrade your router’s software

The firmware on your router could be the cause of your weak Wi-Fi signal. While this is unlikely, as firmware updates for routers don’t happen often, it’s best to use the latest version of your router’s firmware when possible. If you have been having problems with your Wi-Fi signal or connection, firmware updates that fix security flaws and vulnerabilities may help.

Change the Wi-Fi channel.

The Wi-Fi channel your router uses can also change your Wi-Fi signal. Your router may be sending signals on both the 2.4GHz and 5GHz bands. These two bands have many channels; some of them overlap and can cause interference. By changing the Wi-Fi channels on your router, you can improve your Wi-Fi signal by getting rid of the interference.

Also, 802.11ax, commonly known as Wi-Fi 6 and Wi-Fi 6E, is the latest generation of Wi-Fi and now has an additional 6GHz Wi-Fi band. If you can find a router with 6GHz Wi-Fi, you may be the only person on your block with it. This means your Wi-Fi signal will be stronger than ever.